AustralIan
Member
I didn't realise the XTR had better electrical protection and vibration protection as well. Not bad
We just had a very troubling failure with an Advantech ADAM-6117EI analog input module, when the value read by the PLC did not update for some time. Since the input was monitoring a controlled temperature, nobody noticed the lack of change until the techs went in to calibrate the transmitter and got no response. It has been replaced with Point I/O, which will be the standard for all future expansion.
I'm also looking for a less expensive alternative to the AB point IO for Ethernet I/P remote IO. Besides Wago, I'm looking at Moxa and Omron. Anyone with experience with either of these?