Hi all
We have 3 micrologic 1400 plc which runs 3 individual tanks. Where each plc control 1individual tanks and every tank has its own hmi.
Now we have requirement all the hmi tags need to brought into scada.
FTVIEW SE.
When all the 3 PLCs are connected to Factorytalk SE, there is an overlap of values between 3 skids.
I think that’s because the tags are different but the registers where the those values are stored in PLC, are same for many of them.
E.g. tank 1 temp value is stored in B3:0/1, Tank 2 Temperature value is also stored in B3:0/1, so there is conflict and Tanks 2 also shows 30 deg. cel. In scada.
Can any one hel
We have 3 micrologic 1400 plc which runs 3 individual tanks. Where each plc control 1individual tanks and every tank has its own hmi.
Now we have requirement all the hmi tags need to brought into scada.
FTVIEW SE.
When all the 3 PLCs are connected to Factorytalk SE, there is an overlap of values between 3 skids.
I think that’s because the tags are different but the registers where the those values are stored in PLC, are same for many of them.
E.g. tank 1 temp value is stored in B3:0/1, Tank 2 Temperature value is also stored in B3:0/1, so there is conflict and Tanks 2 also shows 30 deg. cel. In scada.
Can any one hel
