Factory Talk Config

Hi To All (from new member)

Having a problem with RSViewME. Cannot get the FactoryTalk Configuration wizard to run, it just hangs when trying to configure the Local directory. The FactoryTalk diagnostic viewer gives the following message...

Factory Talk Directory Multiplexor Failed to connect to Factory Talk Scope Directory, in “$Local” scope. The connection may be re-established at a later time. I also get the following error code... Error HResult=”0x80042002” Location= “.\ RNADirServerProxy.cpp Line: 7167




This has happened since trying to re-install RSView after a crash. (used to work OK before)




I would appreciate any advice on how to fix this.




Regards Alan

See this technote


http://rockwellautomation.custhelp.com/cgi-bin/rockwellautomation.cfg/php/enduser/std_adp.php?p_faqid=36376&p_created=1156219200&p_sid=tWspV_vi&p_accessibility=0&p_lva=32015&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PWRmbHQmcF9ncmlkc29ydD0mcF9yb3dfY250PTQ2NSZwX3Byb2RzPTAmcF9jYXRzPTAmcF9wdj0mcF9jdj0mcF9zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MiZwX3NlYXJjaF90ZXh0PWZhY3RvcnkgdGFsaw**&p_li=&p_topview=1