PLC programming through an NATR

You can so long as your public and private sides of the NATR are configured properly. You will only be able to see your devices that are mapped through a NATR using your ethernet driver in RSLinx though.
 

Similar Topics

Hi everyone, I am wondering how to communicate to a PLC using VB. I currently have a "Click PLC programming module", that I am communicating to...
Replies
18
Views
7,846
Dear all, Does anyone know if it is possible to program the plc via the Siemens Series 8 control..... say from the front D25 socket, as I don't...
Replies
0
Views
2,973
Hello colleagues, Some time ago I started my adventure with programming. With your help and the courses, things are starting to come together...
Replies
13
Views
591
Dear All, I need a sample PLC program to count the output pulse of a mass flow meter so that a specific amount of mass (for example 100gm)can be...
Replies
2
Views
80
Hi Please I have zeilo smart relay #SR2A201BD but I don't have it's programming cable. Can I use any general usb/rs232 converter? Or need...
Replies
2
Views
79
Back
Top Bottom