delta plc
- Thread starter mixtrade
- Start date
http://www.delta.com.tw/product/em/control/plc/download/manual/Delta_PLC-Program_O_EN_20130530.pdf
The proportional valve will usually be controlled by an analog output of the PLC.
Write an analog output in the PLC and this will control the valve. See examples in the manual above.
What have you tried so far?
Regards,
The proportional valve will usually be controlled by an analog output of the PLC.
Write an analog output in the PLC and this will control the valve. See examples in the manual above.
What have you tried so far?
Regards,
guydegraeff
Member
Hi Mixtrade.
Have you tried chatting to the technical guys at Electro Mechanica? I do not know the Durban branch to well so if you are unable to get the help you need from them contact the Cape Town branch and ask to speak to William Cameron, Morne' Horn or Ian Runnalls. Or just give me a call, I have pm'd you my number.
Cheers
Guy
Have you tried chatting to the technical guys at Electro Mechanica? I do not know the Durban branch to well so if you are unable to get the help you need from them contact the Cape Town branch and ask to speak to William Cameron, Morne' Horn or Ian Runnalls. Or just give me a call, I have pm'd you my number.
Cheers
Guy
Last edited:
JAMALCOGOF
Member
emailme [email protected]
Similar Topics
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
I have downloaded COMMGR 1.15 software on my laptop. After downloading it works. When I stop and start the program again it doesn't work.
It is...
How i Can connect Delta plc, with Beckoff remote IO cards?
Hi Everyone,
I am currently trying to communicate ControlLogix PLCs via EtherNet/IP with Delta V DCS. There is a VIM2 card configured for...
Does anyone know videos in English with trains for Delta PLC