Ramsri
Member
Anyone used Micrologix 1400 with Proface HMI on Ethenert/IP? There is no PLC drivers available for this model? I think i need to try on modbus tcp/ip but before going just wanna try once.
Post ur reply.
Post ur reply.
Allen bradley with Proface
- Thread starter Ramsri
- Start date
Maybe you should select manufacturer to Rockwell Automati.Inc then select EthernetI/P driver and choose port to TCP and check it manual that have configuration for Micrologix 1100 but I think for Micrologix 1400 are use same configuration.
LadderLogic
Member
Similar Topics
Hello all,
I am in my first year of programming and stuck up on a few things for a project that needs to be completed this week. My boss and...
Hi. We have mashine with AB SLC5/04CPU PLC and Proface AGP3500. I need transfer data AB SLC5/04CPU PLC to TSX momentum PLC using ethernet...
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
Dear community,
I am trying to find a tool for Allen-Bradley PLCs similar to SiVArch for Siemens PLCs to automatically generate faceplates and...
Hi everyone, new to forum. Since very long time i having issue with 1734-AENT module, after some period of time its keep stuck in error (simmilar...
