SLC5/04 to PanelView 800 HMI

Jonesca9

Member
Join Date
Jul 2009
Location
Cheshire
Posts
19
Has anyone made a connection from a SLC to a Panelview 800, specifically using the 1761-NET-ENI interface. The literature says a connection to the Micrologix is possible with Ethernet/IP/ENI but will the SLC work?

The reason is the client likes the higher resolution graphics and an existing machine needs 2 new HMI's.

The client does not want 3rd party devices but any other suggestions would be welcome.
 
Yes, it will work with no problem. I did it several years ago. Be careful panelview plus not panelview standard.
Umm. It is the Panelview "800" they were looking at. it has better resolution than the PanelView Plus range and is less expensive for what they need.
 

Similar Topics

Hi there, I'm wanting to connect a panelview 800 to an SLC5/03 the SLC is connected to an 1747-AIC which is run to another 1747-AIC. I'm trying...
Replies
0
Views
1,540
Good evening. I am in serious need of help. I am trying to connect a Panelview Plus 7 Standard to a SLC5/03(1741-L531) using a Moxa MGate...
Replies
3
Views
602
I know I should know the answer to this but it's been a while. I am working on a project that has a SLC5/05 and several Remote I/O panels. I have...
Replies
4
Views
2,389
I have spent far too much time on this and not got communication working yet. Equipment: SLC 5/03 1747-L532 series C, Panelview Plus 600...
Replies
10
Views
4,060
hi all1 i want to communicate and programme my slc 5/04 with panelview550 2711-b5a5,, can any one guide how i communicate HMi with my slc5/04...
Replies
3
Views
1,432
Back
Top Bottom