I have used Cimplicity HMI 6.1 talking ethernet to a SLC 5/05. However, I cannot seem to get it to talk ethernet to a micrologix 1100. Has anyone done this? If so, what do I have to do differently to talk to the micro than what I did to talk to the SLC? I changed the station number to point to the micrologix but that did not work. I do know that the micrologix 1100 is capable of talking ethernetIP, but I would think it can still talk using standard AB-ETH, I can sure see it in the who window in linx with both AB-ETH and ETHIP.