Using Profihub B4F02 in Ring Topology

Engineer_UA

Member
E
Join Date
Oct 2016
Location
California
Posts
43
Greetings,

Is it possible to network together multiple Profihub B4F02 and host PLC using fiber optics in a ring network configuration. I've got SCADA PLC and multiple profihub devices scattered around multi building facility.

Any input would be appreciated.
Thanks,
EE
 

Similar Topics

L
Using RAs IO Device Library with 1576-ENBT
Hi, I'm trying to use the IO Device Library (Product Versions) which is configured to work with the 1756-EN4TR & 1756-EN2TR but my system uses...
Replies
0
Views
41
LabRat906
L
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
74
Para
P
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
84
yawin
Y
T
can i change panelview text using keypad?
Hey all, i have a panelview screen (image attached), with 4 items on it. Program 1, Program 2, ...3, ...4. The PLC i am using is a compactlogix...
Replies
5
Views
158
Ken Roach
Ken Roach
J
simulation setup using horner OCS using structured text (Cscape)
I am trying to set up a piece of equipment with a Horner HE-X4R. I'd like to use structured text and so far I'm just trying to get a basic On/off...
Replies
0
Views
67
jdk202
J
Back
Top Bottom