Read current from inverter into S7-300 plc

uptown47

Lifetime Supporting Member
U
Join Date
Feb 2008
Location
Over there, next to those boxes
Posts
1,146
Hi all,
I'm trying to read the current output from an inverter into the PLC.

The inverter has an analogue output configured for current.

I've got spare analogue inputs at the PLC.

Can I just connect the two together and then do some form of scaling in the PLC?

What's the best way to do this?

Thanks :)
 

Similar Topics

C
Read motor current with flex I/O
Hello all, I have some motors and I wish to read their current. Is there a device or module that can measure these and convert them to a standard...
Replies
9
Views
4,016
CQ21
C
J
To Read Voltage And Current Values through RS 485 Communication
Hai Everybody, I have a doubt about How to read Voltage and Current values from a multifunction meter to Allen Bradley SLC 500 PLC through RS...
Replies
11
Views
3,007
mdim
mdim
D
Danfoss FC302 - Read current 32Bit
Hello, I'm using a Danfoss drive FC302 connect via profidrive to a Siemens PLC 315. My problem is how can I read from the drive a current upper...
Replies
3
Views
2,184
Michal_dk
M
L
Modify AB code to read current at a specific point in time
I would like to be able to display on my HMI (AB 600 Plus) the amount of current being drawn by a motor at the instant that the accumulated value...
Replies
4
Views
2,309
lsam
L
N
VB code to read current receipe name in a string ... FTVIEW SE TO ML1400
Hi , in my application i was supposed to read the recipe name in a string & have to display it all other screens of scada & to perform operation...
Replies
0
Views
2,901
Nelliyan
N
Back
Top Bottom