Difference between Modbus TCP/IP and Modbus RTU

IdealDan

Member
I
Join Date
May 2017
Location
MA
Posts
480
Hi Guys,


1. When using MODBUS TCP/IP, do I still have to use any INSTRUCTION on the programming software to read/write data after setting the Parameter(IP address etc)?
I would actually like to know the differences between MODBUS TCP/IP and MODBUS RTU
Thanks in advance.


2. Secondly, how is the MBRW Instruction of Mitsubishi utilized?
 

Similar Topics

H
iFix 5.1 - Difference in value between AO and AA block
Hello, I have a problem with AO- and AA-Tags. When I use for example the tag AO_Test with the address 200 and type the value 1,2 in, the AA-Tag...
Replies
7
Views
1,403
Heinz8
H
Mas01
GX developer: what's the difference between a coil and a SET/RST?
As per the title. This might seem like a basic question to many, but I'm unclear about the difference between a coil ( ) and an application...
2
Replies
28
Views
4,007
parky
P
C
What is the difference between a Regular Freq. Drive and a Pump Drive ?
Good Morning , I have 2 Frequency Drive panels to build and commission . It is for 2 pump systems . Just wondering , what is the...
Replies
4
Views
1,958
Cydog
C
E
Difference between SIMATIC Batch and PM Control
Hi Experts, Good day! What are the differences between PCS7 SIMATIC Batch and PM Control? Do you have any manual like "Getting Started "...
Replies
0
Views
802
EMENDOZA
E
J
Difference between PLC output options: Sourcing/Relay
I have a Automation Direct Click Plus that you can buy option CPU slot modules for input/outputs. The slot modules have the options of sinking...
Replies
9
Views
2,805
I_Automation
I_Automation
Back
Top Bottom