Inverter suitable for Canada

Johnny T · Sep 20, 2005

Hi,

I'm after getting hold of an inverter in the UK suitable for a job that's being shipped to Canada.

The inverter has to be fed by single phase (110V - I believe...).

I've tried Omron but got no joy and also ABB.

I just wondered if anyone has any recommendations or anything I need to watch out for as the job needs to be tested here in the UK before going out to Canada.

Cheers

JT

OkiePC · Sep 20, 2005

Find out the power and voltage requirements and then try here.

Many AC drives will accept single phase input, but must be derated...check the manual for whatever drive you choose.

Allan Barnes · Sep 20, 2005

Wow a Job comming from the other side of the pond, I usaly am sending stuff your way.
I have never used one of these but I had a local Omron rep bring one by.
Try this
http://www.omron.ca/PDF/inverter_manuals/XC%20Brochure_SB%20XCSP-2_0604.pdf

krk · Sep 20, 2005

Hi John,

Siemens do a Micromaster 410 that can be fed with 100..120VAC 1ph

The power range available is only 0.12kW to 0.75kW though...

Kevin

Johnny T · Sep 20, 2005

Many thanks for the replies.

Cheers

JT

)

theDave2 · Sep 20, 2005

Yaskawa VS Mini (#CIMR-XCBMA0P70) can provide a 1HP 3 phase output from a 120vac single phase input line.

Johnny T · Sep 20, 2005

Cheers for that Dave... I'll look into it.

Inverter suitable for Canada

Johnny T

Member

OkiePC

Lifetime Supporting Member

Allan Barnes

Member

krk

Lifetime Supporting Member

Johnny T

Member

theDave2

Member

Johnny T

Member

Similar Topics