Papa_Ak Member P Join Date Jun 2017 Location new york Posts 3 Aug 15, 2017 #1 Please is it possible to copy the eproms of the eberle 511 to another same cpu? will it work without any issues? Please help and thank you.
Please is it possible to copy the eproms of the eberle 511 to another same cpu? will it work without any issues? Please help and thank you.
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Aug 15, 2017 #2 http://www.plctalk.net/qanda/showthread.php?t=384 http://forums.mrplc.com/index.php?/topic/3019-telemecanique-tsx-21/ The above threads may help you out. If you copy the eprom then the controller should work. This controller should be replaced with something that is at least supported. Do you have a copy of the program? Regards,
http://www.plctalk.net/qanda/showthread.php?t=384 http://forums.mrplc.com/index.php?/topic/3019-telemecanique-tsx-21/ The above threads may help you out. If you copy the eprom then the controller should work. This controller should be replaced with something that is at least supported. Do you have a copy of the program? Regards,
Papa_Ak Member OP P Join Date Jun 2017 Location new york Posts 3 Aug 15, 2017 #3 NO, i am copying it from one unto another. Thank you.