i need to use 2 sensors, high level and low level in cx programmer to start the motor
as soon start button is pressed the motor starts and rises the level thus covering the low level sensor and as the level reaches the high level sensor, the motor should stops.
i need to start the motor again as soon as the level reaches pass the low level sensor.
please advise how to design in ladder logic
Thanks
as soon start button is pressed the motor starts and rises the level thus covering the low level sensor and as the level reaches the high level sensor, the motor should stops.
i need to start the motor again as soon as the level reaches pass the low level sensor.
please advise how to design in ladder logic
Thanks