Asem HMI30 upload

We have an Asem HMI30 touch panel.

Which software should be used to upload the program from it?
Which cable to connect from laptop to hmi?

http://www.asem.it/en/products/industrial-automation/hmi-solutions/hmi30/

Thank you

The software is called Premium HMI development environment:
http://www.asem.it/en/products/industrial-automation/hmi-software/hmi-software/setup-downloads/

You can connect the configuration PC to HMI30 in several ways:
1) By using a Ethernet cross cable connected by one end to the configuration PC and on the other end to one of two Ethernet ports of HMI30.
2) By connecting HMI30 to a Ethernet switch on which the configuration PC
and HMI30 are both connected
3) By connecting HMI30 and the configuration PC to the office LAN

For more information here is the manual:
http://www.otomotion.net/files/HMI30UserMan.pdf

The transfer from HMI to PC is descriped starting page 57