22 comm e power

Here is my crazy question for the month. I need to have an alternate way to power up a 22 comm e card so it can be programmed with CCW. I have asked for a 480 volt drop in my office but was told no because we are moving the offices very soon. That was over 2 years ago. By the way I am using the 22 comm e card on power flex 40 drives. If i was to supply 240 volt to L1 and L2 would the drive power up with a fault? Or at best provide power to the 22 comm e card?

Thanks for all the Help
JimCav

http://www.plctalk.net/qanda/showthread.php?t=115852

What about just using a wireless option on the Ethernet? You can then just wire the drive to a location where you have the power.

Just a thought.
Regards,

You could always acquire a 480->240 transformer, wire it backwards and supply single phase to the drive.