Has anyone here sucessfully used a 3rd party HMI with a SEW Eurodrive MoviPLC? I am trying to develop a sytem using MovidriveB inverters and a Movi-PLC (DHR 21B) and and have had no luck with either of my two go to HMI's (Idec & Weintek) being able to connect via Modbus TCP. It appears that the SEW modbus supports only function codes 3, 16 & 23 and the HMI's are using different FC's to read & write (3 & 10)
If you have used an HMI with an SEW PLC then I would greatly appreciate a recomendation (but only if you know it works)
The PLC also supports EthernetIP but I havn't looked to see it either of my HMI's have a compatible driver yet. That's on the plan for next week.
Thanks in advance
Ken
If you have used an HMI with an SEW PLC then I would greatly appreciate a recomendation (but only if you know it works)
The PLC also supports EthernetIP but I havn't looked to see it either of my HMI's have a compatible driver yet. That's on the plan for next week.
Thanks in advance
Ken