Wincc 7.0 Hotkeys

hein123

Member
H
Join Date
Aug 2010
Location
Uitenhage
Posts
93
Hi

I currently have a problem with the Hotkey function. I have different pictures with different buttons. What gets me is that some work and others don't. Even when I try to change the hotkey that I am sure is not used it does not work.

Any ideas?

Also I want to dynamically change the hotkeys using VBS, where could I find they keys numbers? Or is this possible?

ANy advice would be appreciated
 

Similar Topics

B
HMI GRAPHICS MISSING_WINCC UNIFIED V18.UPD3
Does anyone happen to know how to install the graphic picture in HMI when I go into blower selection there are no graphics shown not only blower...
Replies
1
Views
50
Jkoso
J
P
WinCC RT Advanced - Data Logging Memory
Hi folks, I'm not as accustom with Siemens & WinCC, however I've been asked to increase the amount of data an existing application is logging...
Replies
2
Views
52
Plantationpark
P
A
WinCC Unified and PLC weird communication issue
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...
Replies
4
Views
133
mk42
M
A
Buttons Not Working in WinCC Unified
I am creating a project with WinCC Unified v16 Upd6 (PC runtime) with an S7-1200. The communication is good between the PC and the PLC as I can...
Replies
6
Views
184
drbitboy
drbitboy
C
How to Time Sync? S7-400H CPU (Time Master) With Wincc Runtime V7.5(Time Slaves)
hello s7-400h and wincc are connected to each other via Ethernet. I need help on how to do time synchronization
Replies
0
Views
47
Controller5848
C
Back
Top Bottom