Hi All..
I have a fuel controller that only accepts 1.6 to 2.8 VDC feedback from the actuator. I need to replace that with a 4-20 mA or a 0-5 VDC feedback actuator.
Any Ideas on how I can accomplish this??
The fuel controller will not accept changes to its configuration.
I have a fuel controller that only accepts 1.6 to 2.8 VDC feedback from the actuator. I need to replace that with a 4-20 mA or a 0-5 VDC feedback actuator.
Any Ideas on how I can accomplish this??
The fuel controller will not accept changes to its configuration.