uptown47
Lifetime Supporting Member
Hi all,
I'm trying to convert some S5 STL to S7 LAD and I just need to know if I'm interpreting the following STL correctly:
Am I right in thinking that this is just an Integer Addition in LADDER with M215.6 on the ENO output ?
I've created that rung in Ladder and it translates to this in STL:
Is this a correct translation or am I missing something?
Many thanks for all your help.
Cheers
;-)
I'm trying to convert some S5 STL to S7 LAD and I just need to know if I'm interpreting the following STL correctly:
Code:
Original STL
L DBW 452
L 1
+I
T DBW 452
= M 215.6
Am I right in thinking that this is just an Integer Addition in LADDER with M215.6 on the ENO output ?
I've created that rung in Ladder and it translates to this in STL:
Code:
L DBW 452
L 1
+I
T DBW452
AN OV
SAVE
CLR
A BR
= M 215.6
Is this a correct translation or am I missing something?
Many thanks for all your help.
Cheers
;-)