Hi,
I must admit I have limited knowledge of PLCs and their communictaion protocols. I am looking for some help on connecting to two PCL-5/10 units. We seem to have misplaced our DH+ card & cable so our HQ sent us a 1784-PCMK A card, but no cable. We also have a 1784-PCD C card. I am assuming that if we get the correct cable we could use the 1784-PCMK A card to connect to the PLC-5/10? I am also assuming that we can't use the 1784-PCD C card for this? We have all the software, just no way to connect to these directly.
Thanks in advance,
Matt
I must admit I have limited knowledge of PLCs and their communictaion protocols. I am looking for some help on connecting to two PCL-5/10 units. We seem to have misplaced our DH+ card & cable so our HQ sent us a 1784-PCMK A card, but no cable. We also have a 1784-PCD C card. I am assuming that if we get the correct cable we could use the 1784-PCMK A card to connect to the PLC-5/10? I am also assuming that we can't use the 1784-PCD C card for this? We have all the software, just no way to connect to these directly.
Thanks in advance,
Matt