Hi,
I'm working in a site that is using ABB software, DigiVis
(using it as a SCADA), Control Builder F 2013 SP1 (for the PLC Programming & SCADA configuration) and DigiBrowse (to convert a data file into a CSV file)
So right now the only way to create/access data from the process is by creating a trend within the "SCADA" (I know it's a DCS not a SCADA*), that creates a file (extension *.001), that then needs to be converted by DigiBrowse to be able to read any data.
My question then is, how can I have access to those files remotely without setting a remote desktop connection?, I don't want to be doing stuff in the PC where the SCADA is whilst the system is running (viewing the data through DigiBrowse or just sending the file via email).
I'm working in a site that is using ABB software, DigiVis
(using it as a SCADA), Control Builder F 2013 SP1 (for the PLC Programming & SCADA configuration) and DigiBrowse (to convert a data file into a CSV file)
So right now the only way to create/access data from the process is by creating a trend within the "SCADA" (I know it's a DCS not a SCADA*), that creates a file (extension *.001), that then needs to be converted by DigiBrowse to be able to read any data.
My question then is, how can I have access to those files remotely without setting a remote desktop connection?, I don't want to be doing stuff in the PC where the SCADA is whilst the system is running (viewing the data through DigiBrowse or just sending the file via email).
