ASF said:...Using the web interface for the switch, I don't know of any way to set a port up to mirror two ports at once. I don't think it's possible...
robertkjonesjr said:From the Stratix user manual:
Quote:
You can configure port mirroring on only one port via Device Manager.
However, you can configure multiple ports via the CLI.
970047 - Multiple Port Mirroring Sessions on a Stratix switch
Access Level: TechConnect
(Workaround 2)
Yes, for the Stratix switches, which are essentially Cisco IOS, this is quite possible via the CLI.
G.