Connecting Honeywell HC900 to Kepserverex

dearannie21

Member
D
Join Date
Aug 2017
Location
Illinois
Posts
6
Greetings!
I'm trying to connect HC900 to Kepserver in Plant via HC900 ethernet driver provided by Kepserver. I put the IP address and most of other settings are default. I'm having difficulties to get the connection and reading input values.
Does anyone have the experiences and know how to connect?

Thanks for reading
 

Similar Topics

T
Connecting thermocouple to Honeywell HC900
Greetings to all! As I am new to Honeywell's PLC usage, perhaps someone with more experience could help me. My assignement is to collect data...
Replies
2
Views
4,567
TheFog
T
T
Connecting a PLC5/40C to Honeywell Experion using 1785-ENET
As the title indicates I am trying to connect a PLC5/40C to Honeywell Experion R301 using 1785-ENET card. I am not really familiar with PLCs at...
Replies
2
Views
2,990
tck
T
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
15
Tecnolaundry
T
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
79
jscampbell210
J
K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
87
drbitboy
drbitboy
Back
Top Bottom