mbd0722
Member
Software Utility to Map PLC Network Bus Topology
The bus cabling in the Quantum PLC network are long runs and very difficult to trace. The network asbuilts are incorrect. Is there a Schneider Modicon or third party software utility to discover and map the PLC network topology of Modbus non-redundant Cable A, Cable B as well as the Modbus Plus bus? I would like to find out what physical order the Remote I/O Quantum 140CRA93200 Drops and TSX Momentum I/O nodes are connected without having to take down the network. The PLC software loaded is Schneider Modicon Concept 2.5. Thank You
The bus cabling in the Quantum PLC network are long runs and very difficult to trace. The network asbuilts are incorrect. Is there a Schneider Modicon or third party software utility to discover and map the PLC network topology of Modbus non-redundant Cable A, Cable B as well as the Modbus Plus bus? I would like to find out what physical order the Remote I/O Quantum 140CRA93200 Drops and TSX Momentum I/O nodes are connected without having to take down the network. The PLC software loaded is Schneider Modicon Concept 2.5. Thank You