PLc and Motorola V66

TEOWK

Member
T
Join Date
Oct 2004
Location
Batu Pahat
Posts
38
I have a project to replace an existing GSM Modem with Motorola V66 for SMS messaging using PLC. Previously I use an RS 232 port to send AT command to dirve the GSM Modem. But now we are provided with a Motorola V.66 handset. Please advise thow can I communicate with this handset model to send out SMS. Thank you.
 

Similar Topics

S
Motorola Bar code scanner with Siemens PLC and HMI
I want to be able to scan in bar codes and display them on my Siemens MP 377 panel. I'm using an s7-315 PLC. Where would I start for configuring this?
Replies
1
Views
4,354
widelto
widelto
bluenoser337
Does Anyone Know Motorola PLC?
Does anyone out there know Motorola ACE3600 STS PLC programming?
Replies
5
Views
4,742
bluenoser337
bluenoser337
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
22
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
4
Views
94
Puddle
P
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
46
Alibaba07
A
Back
Top Bottom