WireGuy1950
Member
I am quoting the conversion of eight of our machine's old Xycom 2050 panels to GE QuickPanel View (12") screens (customer spec.).
I have contacted GE and they seem to have a driver for TI 545 series which is good, there are 4 of these, but the other 4 are TI 530C processors, which use NITP protocol which is not the same as TI-545 (TBP protocol).
Does anyone know if the GE will do this or if there are any third party drivers available, GE help is poor and pretty unresponsive.
I have contacted GE and they seem to have a driver for TI 545 series which is good, there are 4 of these, but the other 4 are TI 530C processors, which use NITP protocol which is not the same as TI-545 (TBP protocol).
Does anyone know if the GE will do this or if there are any third party drivers available, GE help is poor and pretty unresponsive.