Integrate Axis IP Camera feed into FactoryTalk Studio HMI Application - PLCS.net

jmaty23 · September 27th, 2016, 03:00 PM

I am looking into the possibility of integrating an existing AXIS IP Camera feed into a FactoryTalk HMI Application. I have downloaded and installed the AXISMediaControl ActiveX control and loaded it into a Display.

I am currently having trouble filling in all of the parameters correctly on the Connections tab of the ActiveX properties screen to get the video to show on the HMI display.

I am wondering if anyone has been able to get this to work and if they can offer any pointers?

I downloaded the Axis Camera SDK and have tried to fill in all of the connection fields as much as possible by going through each connection item and looking up the definition in the SDK help document but still cannot get the video to show in the control.

Hojland · January 13th, 2021, 02:49 PM

Did you make it work. I am trying the same

September 27th, 2016, 03:00 PM	#1
jmaty23 Member Join Date: Mar 2009 Location: New York Posts: 49	Integrate Axis IP Camera feed into FactoryTalk Studio HMI Application I am looking into the possibility of integrating an existing AXIS IP Camera feed into a FactoryTalk HMI Application. I have downloaded and installed the AXISMediaControl ActiveX control and loaded it into a Display. I am currently having trouble filling in all of the parameters correctly on the Connections tab of the ActiveX properties screen to get the video to show on the HMI display. I am wondering if anyone has been able to get this to work and if they can offer any pointers? I downloaded the Axis Camera SDK and have tried to fill in all of the connection fields as much as possible by going through each connection item and looking up the definition in the SDK help document but still cannot get the video to show in the control.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Can I use RSEmulate 500 to test a FactoryTalk View Studio ME application	lukewiersma	LIVE PLC Questions And Answers	7	August 30th, 2019 04:24 AM
FactoryTalk HMI architecture computers and panelview mix	V0N_hydro	LIVE PLC Questions And Answers	2	January 7th, 2014 11:45 AM
New to AB panelview +600 & AB PLC	theripley	LIVE PLC Questions And Answers	17	September 9th, 2013 08:38 PM
Redundant HMI Server FactoryTalk SE Issue	josh_d	LIVE PLC Questions And Answers	2	March 15th, 2012 07:06 AM
FactoryTalk View Studio HMI with Remote IO Scanner	dabomb4097	LIVE PLC Questions And Answers	6	February 8th, 2012 10:30 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

January 13th, 2021, 02:49 PM	#2
Hojland Member Join Date: Oct 2006 Location: Langå Posts: 186	Did you make it work. I am trying the same

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)