RockyNivas
Member
Hello everyone,
I am interfacing AB PLC with a particle counter SC200 using RS Logix 5000. The particle counter value on its screen and the value which is showing in the HMI is totally different. The current value has been set to 4-20 mA and getting the values in the form of percentage from the PLC. I would like to know whether do I need get the values in the format of "Engineering" or I have to make changes in some other thing.
Kindly help me to sort it out.
Thanks in advance.
I am interfacing AB PLC with a particle counter SC200 using RS Logix 5000. The particle counter value on its screen and the value which is showing in the HMI is totally different. The current value has been set to 4-20 mA and getting the values in the form of percentage from the PLC. I would like to know whether do I need get the values in the format of "Engineering" or I have to make changes in some other thing.
Kindly help me to sort it out.
Thanks in advance.