Looking for an instrument, dust detection.

ASF · Mar 26, 2019

Look for Goyen and Rembe. They have a wide range of products in the dust detection and explosion prevention market.

Skidood · Mar 26, 2019

I know what it's like. I spent some time working in a place that made eye drops and solutions for contact lenses. In some areas, you could not have any bare skin showing anywhere.. (had to wear these big goggles) and you were thoroughly tested on gowning technique. Could not let the bunny suit touch the floor while putting it on, and they swabbed you all over the place once you got the bunnysuit on to check for microbial contamination. I hated that place....

geniusintraining said:
A "Clean Room" is a term used in manufacturing https://www.americancleanrooms.com/cleanroom-classifications/

They have different classes, we made copper clad laminate for printed circuit boards and you could not have any dust in side a circuit board or you would have a short... a class 10000 is less than >0.1 um per square foot

Kind of a pain because you had to be covered from head to toe when entering and you went through a couple air chambers/showers to remove airborne particles

So yes the ones I used are overkill for you

Looking for an instrument, dust detection.

ASF

Lifetime Supporting Member

Skidood

Member

Similar Topics