Hakko V708C HMI

I have a HAKKO V708C HMI on a machine which I believe is now obsolete.

I'm struggling to find any documentation on the device. What software is required, programming cables etc. Can you even upload the project off the unit to modify/look at?

Any help appreciated

Digging around some more I found out that HAKKO are part of Fuji Electric. You need an RS-232C cable and V-SFT-5 (Ver. 5) software.

Found it in this migration guide to their V9 panels. https://monitouch.fujielectric.com/uploaded/attachment/152.pdf

I assume you can upload from the HMI. But will need to get a copy of the software and test.