FactoryTalk View Studio Recipe Problem

hungwei

Member
Join Date
Jul 2018
Location
Tainan
Posts
9
Hello Eveyone:

I have PVPlus Compact 1000 ,and I use FactoryTalk to create recipes

now I do not know, how to Export and Import recipe data from HMI (use USB Storage)

I am come from Taiwan, so..It’s a little hard to use English,sorry@@
 
Last edited:
I know it's two years later, but if anyone has a solution, I would really love to hear it.

I believe exporting recipe data could be done using ME DataStore Plus ActiveX Control, but how would you go about importing the recipe file back into the HMI?

It seems absurd if it's not possible to backup recipe files without downloading a new runtime application to the panel.

I have considered using Recipe 2 Enhanced ActiveX Control, because then at least the recipes are stored in .csv files and can be easily viewed, but I still can't figure out how to import the files back into the HMI and overwrite the existing files.
 

Similar Topics

Hello, I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and...
Replies
0
Views
74
Hi all, I'm having an issue with connecting View Studio emulation to a real PLC. I am running View Studio 8.01 on a Hyper-V virtual machine...
Replies
0
Views
233
Hello. I have a Project I'm doing in Factorytalk View Studio. One of my displays I created has a bunch of red x's on all of the objects I created...
Replies
5
Views
511
So, I'm new to the PLC world (fresh graduate) and at my job I've been pretty much only helping out the other programmers with simpler tasks while...
Replies
1
Views
583
Good morning, I have a project coming up that will require my HMI runtime to toggle from English to Spanish via selector switch. What is the...
Replies
0
Views
433
Back
Top Bottom