Pilz 772138 on Step7

marvis · May 15, 2020

Hi guys,

how to do connect "Pilz 772138" on hardware like the pic? is it possible? I am newbie on Siemens.

Thanks

JRW · May 15, 2020

No

You picked profibus

You need profinet gsd

https://docs-emea.rs-online.com/webdocs/14c0/0900766b814c0397.pdf

bkottaras · May 15, 2020

You are looking at an GSD file for Profibus but you only have setup Profinet in your hardware configuration.
You need to set up a Profibus network (if your hardware supports Profibus) and then try to add the Pilz device to it.

JRW · May 15, 2020

So do you have a profibus pilz or profinet????

marvis · May 15, 2020

Thanks guys,

I have a Pilz 772138 that is Profinet, but I don't find .gds file for it.
My hardware is IM151-8F PN/DP CPU. Is it supported for this module?

Thanks in advance.

JRW · May 15, 2020

Yes. Your cpu supports profinet

For profibus you would need a master module

marvis · May 15, 2020

OK thanks,

but sorry, how to find .gsd file for my specific module? I need only of this file and after drag and drop under my profinet like the picture, is it true?

L D[AR2P#0.0] · May 15, 2020

Go to the Pilz website and download the gsd and then install it in Simatic manager from the h/w config options. Select the firmware version you are using, (I chose V2.2)

marvis · May 15, 2020

Great!

Thanks for all.

Pilz 772138 on Step7

marvis

Member

JRW

Member

bkottaras

Member

JRW

Member

marvis

Member

JRW

Member

marvis

Member

L D[AR2P#0.0]

Lifetime Supporting Member

marvis

Member

Similar Topics