Omron NJ101-9000 and Powerflex 525

yarock

Member
Y
Join Date
May 2020
Location
Quebec
Posts
1
Hi,
I want to control an AB Powerflex 525 drive over Ethernet/IP by using a Omron NJ101-9000.
It seems that I would need an EDS file to communicate but I can't find one.
Would someone have some tips about how to establish the communication?
Thank you!
 

Similar Topics

W
Omron NJ101 to Omron NJ101 communication
I'm new to the Omron world and struggling a bit with transferring data from one NJ controller to another. The first thing I want to do is a...
Replies
1
Views
983
Whatsup
W
J
Omron NJ101 PLC and Cmore EA7 HMI
Has any one connected the Cmore panel to an Omron NJ PLC if so how? I have been reading up on the FINS communication protocol, Seems a bit fuzzy...
Replies
7
Views
2,521
gtsuport
G
T
Omron NJ101-1000 - First Program Problem
I am just getting started with a Omron NJ and am trying to get a basic ladder to work. I am sure I am missing a step or something. When a input...
Replies
1
Views
1,475
gclshortt
gclshortt
M
Struggling to get good connectivity with Omron PLC (CS) and KeserverEx
Hi There, I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...
Replies
1
Views
47
Corsair
C
A
Omron cj1m ETN cpu11 connection with NT631C
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Replies
5
Views
80
IO_Rack
IO_Rack
Back
Top Bottom