Program ALTIVAR 71 with rslogix5000

SoftBrian

Member
S
Join Date
Jul 2018
Location
coronel
Posts
1
Hello everyone, we want to control an engine with the altivar 71 drive, we have the configuration ready and the program generates some tags but we do not know how to program it

we configure it through rsnetworkdevicenet
and we use the rslogix5000 l32e

If someone could help us we would be grateful
 
what communication protocol is being used? device net? Didnt even know that ATV71 could communicate on that protocol
 

Similar Topics

E
Accessing Altivar builten alarm group in S7 Program using GSD
Hi all, I am trying to access the builten alarm group of Scneider Altivar drive using GSD in S7. Although i have a FB, provided by the vender...
Replies
0
Views
1,990
engrjawwad05
E
M
HMI Connection - {::[PLC1]Program:#1.#3.Abc.Efg} What is the #1.#3 ?
I'm having a hard time either remembering or figuring this out. I have a PLC program and the associated HMI program. I know what this means...
Replies
4
Views
104
plvlce
P
R
How to read/write changes to an existing AB FTView SE program
Hello, I am fairly experienced programming and modifying existing FTView ME programs. I have also used FTView SE to make modifications to a...
Replies
5
Views
132
Operaghost
Operaghost
O
ccw ladder program
my ccw softwer stops working when i add and try to open a ladder program.
Replies
0
Views
79
Ousmane Dia
O
T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
168
TheCaptain2000
T
Back
Top Bottom