Program ALTIVAR 71 with rslogix5000

SoftBrian

Member
S
Join Date
Jul 2018
Location
coronel
Posts
1
Hello everyone, we want to control an engine with the altivar 71 drive, we have the configuration ready and the program generates some tags but we do not know how to program it

we configure it through rsnetworkdevicenet
and we use the rslogix5000 l32e

If someone could help us we would be grateful
 
what communication protocol is being used? device net? Didnt even know that ATV71 could communicate on that protocol
 

Similar Topics

E
Accessing Altivar builten alarm group in S7 Program using GSD
Hi all, I am trying to access the builten alarm group of Scneider Altivar drive using GSD in S7. Although i have a FB, provided by the vender...
Replies
0
Views
1,981
engrjawwad05
E
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
71
mk42
M
C
Need Help Accessing/Printing a Program - CIMPLICITY
Hi all, I am having issues accessing my Cimplicity software - the site code changed after re-install and I am no longer able to attain a new key...
Replies
10
Views
156
Steve Bailey
Steve Bailey
E
PLC Wiring and Program Review
Posted this to Reddit with little success, so I figured I would share it here as well. Very new to PLCs, but figured I would give it a shot to...
Replies
0
Views
115
eerielayne
E
A
Tank level rslogix 5000 program. I’ve got errors on rung 2,3,4. Do u see the problems? Also does my geq n les look right?
Replies
4
Views
181
drbitboy
drbitboy
Back
Top Bottom