compact logix to proface

We urgently need to connect a Proface operator display (Proface GP37W2) to a Rockwell compact logix L31 .
We need info on
1.How to set up the addresses/tags in the Compact logix so the proface can read and write data.
We have set up the Proface to read/write N7:00 to N7:50.
If anyone has donne this successfully it would be very helpfull to us to
get some info which will help in getting this done.
Thanks
JA

You need to use the PV mapping tool in Contlgx5K to set up the tags.
Use the Logic Pulldown menu and click on Map PLC/SLC messages.
This will set up the direct mapping for the integerst that you have specified.
Check out the manual for using PV tags in contrologix help.