GaryS
Member
I would use a vector drive with an encoder mounted on the motor shaft
Simple reliable you can get indexing software for the VFD set you open / closed set points
travel speed and your done.
Activate Open / Closed as needed everything is in the VFD.
I would also install 2 N.C. prox switches for over travel limits. Mechanical limits will ware out quickly in this application. prox switches will last longer
Simple reliable you can get indexing software for the VFD set you open / closed set points
travel speed and your done.
Activate Open / Closed as needed everything is in the VFD.
I would also install 2 N.C. prox switches for over travel limits. Mechanical limits will ware out quickly in this application. prox switches will last longer