Hey guys,
I have a big problem with GE FANUC 90-30. The problem is when I turn off the PLC ,after a while when we turn it on again the logic and configuration(all the materials that was inside the PLC) are deleted from it. I checked the battery and it was ok(3.1 volts).Do you have any idea for this issue?
Thank you in advance for any response.
I have a big problem with GE FANUC 90-30. The problem is when I turn off the PLC ,after a while when we turn it on again the logic and configuration(all the materials that was inside the PLC) are deleted from it. I checked the battery and it was ok(3.1 volts).Do you have any idea for this issue?
Thank you in advance for any response.