Siemens card wiring

Lc1

Member
L
Join Date
Jan 2014
Location
Uk
Posts
59
Hello,
we have a 4 wire analyser transmitter (Mettler toledo M300 single channel measuring PH) two wires are for the 24VDC power supply and 2 wires for the 4-20mA signal which is active.

my question is in relation to the card ( 6DL1134-6TH00-0PH1) wiring can the instrument be wired as per the diagram on page 11 if other channels on the card are wired with 2 wire loop powered instruments?

thanks

4wire.png 2 wire.png
 

Similar Topics

L
Siemens card wiring
Hi, I have a question about the following IO card: 6DL1131-6BL00-OPH1. This is a 32 channel card that can be used as 1 wire or 2 wire. My first...
Replies
2
Views
1,177
Lc1
L
A
Siemens Analog card configuration issue
Hey guys! I have come across an unique issue. Hoping that I can find some solution here. I want to replace an existing S7-1214 DC/DC/DC plc with...
2
Replies
15
Views
4,658
akky
A
C
Analog IO card from Siemens
Dear, I came across an analog card from SIEMENS to be used for transferring analog signals. I couldn't understanding the cable length included...
Replies
0
Views
1,072
Charbel
C
D
S-300 Siemens 326 Series DO card goes to fault
Hi We had a faulty DO card giving SF error in our Siemens PLC setup model 326-2BF01-0AB0 and we replaced this 326-2BF41-0AB0 I/O card. We updated...
Replies
4
Views
2,024
Daelim
D
L
Siemens DI card
Hi, I have a question regarding the DI module 6DL1131-6BL00-0pH1. This is a 32 channel module and it says that it can only handle 2 wire devices...
Replies
1
Views
1,321
kalabdel
K
Back
Top Bottom