automation direct programmer needed

JeffKiper

Lifetime Supporting Member + Moderator
Join Date
Jun 2006
Location
Indiana
Posts
2,447
I be hav e a customer in Knoxville Tennessee. I can't get to the job. It is modifying an existing system adding some logic. 1 analog out 1 analogIn and a few digital I/O.
the customer can download the program and make small tweaks.you don't have to go on site just have to be fluent In automation direct.

I would be happy to help interpret the system. I would prefer to let you deal straight with the customer and Me be totally be out of the loop.
 

Similar Topics

Hello, I have an automation direct d2 262 plc and C-more HMI EA9T6CL-R. I need to prepare a program, scheduled to be performed on a future date. I...
Replies
1
Views
46
Hello all- I have a unique challenge using a customers Direct logic 06 PLC. This customer has a DC motor operating at 10 RPM which is turning a...
Replies
1
Views
94
Hi, I have been trying to run drive via Sysmac studio. I can ping the drive. I can see the logic bits going on/off as per command. But, drive is...
Replies
21
Views
497
Anyone tried Automation Directs new CM5 HMI. We've been the EA9's for a few years now with minimal complaints. A few failures here and there but...
Replies
17
Views
1,444
I'm using an Automation Direct GS20 VFD for the first time and I have a question for the Automation Direct gurus regarding the recommendation of a...
Replies
2
Views
1,071
Back
Top Bottom