joeparrish
Member
Ok I have a micro 1500 24bwa and the Plc Is set to a Pic driver I cant get online
So I was wondering If there is a way that I can set it to get on line with a rs232 dfi useing a 1761-cbl hooked up to my laptop
There are a couple of buttons to the left side of the plc \
one is for run remote and program
the other 2 are like screw ajustments they are 0 and 1
So I was wondering If there is a way that I can set it to get on line with a rs232 dfi useing a 1761-cbl hooked up to my laptop
There are a couple of buttons to the left side of the plc \
one is for run remote and program
the other 2 are like screw ajustments they are 0 and 1