Saulo35
Member
Hi,
I was able to download the PLC program to RSLogix 5000 Emulate and run it, but I am unable to connect FactoryTalk View in "Test Program" mode with the Emulator. No matter what screen I open I get error messages saying that tag xxx is unresolved (all tags).
I believe the reason is I am missing the RSLogix Enterprise "module" in the emulator chassis. I only have the Emulator "processor module" and the RSLinx Classic "module".
Both RSLinx Enterprise and RSLinx Classic services are running.
I tried everything (I think) such as uninstalling Emulate, reinstalling, deleting the HKEY_LOCAL_MACHINE\Software\RockwellAutomation\VirtualBAckplaneMonitor from the Registry, etc.
At one point I got an RSLinx Enterprise "module" in the emulator chassis, but it's gone and I can't remember what I did.
Here are the details:
Any suggestions will be appreciated.
Thank you
I was able to download the PLC program to RSLogix 5000 Emulate and run it, but I am unable to connect FactoryTalk View in "Test Program" mode with the Emulator. No matter what screen I open I get error messages saying that tag xxx is unresolved (all tags).
I believe the reason is I am missing the RSLogix Enterprise "module" in the emulator chassis. I only have the Emulator "processor module" and the RSLinx Classic "module".
Both RSLinx Enterprise and RSLinx Classic services are running.
I tried everything (I think) such as uninstalling Emulate, reinstalling, deleting the HKEY_LOCAL_MACHINE\Software\RockwellAutomation\VirtualBAckplaneMonitor from the Registry, etc.
At one point I got an RSLinx Enterprise "module" in the emulator chassis, but it's gone and I can't remember what I did.
Here are the details:
- Windows XP Professional SP3
- RSLinx Classic 2.59.02
- RSLogix 5000 Emulate 21.03.00
- FactoryTalk View Studio 7.00.00
- RSLogix 5000 17 through 20.01
- RSLinx Enterprise 5.60.00
Any suggestions will be appreciated.
Thank you