reseting counters and timers in rs 5000 - PLCS.net

darrenj · February 23rd, 2005, 12:04 AM

Hey all.. I am just starting out in rs5000 and have come across a sub routine that just wont quit!!

I am looking to reset all timers and counters in that routine..Is there a general reset i can use??basically if someone pushes the stop button iwant to reset 4 tiners and 3 counters to zeroo..i have done it with multiple instrictions..just wondering if you can do it in one shot..

thanks

darren

BobB · February 23rd, 2005, 03:15 PM

You can use a differentiated function to operate your resets. That way the reset will only occur when the button is pressed. If the operator keeps his finger on the button it will not matter. The diff will not work again until the button is released and re-pressed.

I should clarify that a diff is a one shot.

darrenj · February 23rd, 2005, 05:37 PM

Thanks...that is how i have done it but was wondering if there was a "master reset" that would reset all timers and counters..

Thanks

Darren

Ken Roach · February 23rd, 2005, 06:16 PM

There is no instruction or technique in the Logix system that will allow you to reset all the counters and timers in a routine or a program with a single instruction.

You can use the RES instruction, or simply move a zero to the Accumulated value register of each counter or timer.

darrenj · February 23rd, 2005, 06:29 PM

Thanks Ken..clears that up!!

February 23rd, 2005, 12:04 AM	#1
darrenj Member Join Date: Feb 2005 Location: Ottawa Posts: 1,003	reseting counters and timers in rs 5000 Hey all.. I am just starting out in rs5000 and have come across a sub routine that just wont quit!! I am looking to reset all timers and counters in that routine..Is there a general reset i can use??basically if someone pushes the stop button iwant to reset 4 tiners and 3 counters to zeroo..i have done it with multiple instrictions..just wondering if you can do it in one shot.. thanks darren

February 23rd, 2005, 03:15 PM	#2
BobB Lifetime Supporting Member Join Date: Jun 2002 Location: Sydney Posts: 4,517	You can use a differentiated function to operate your resets. That way the reset will only occur when the button is pressed. If the operator keeps his finger on the button it will not matter. The diff will not work again until the button is released and re-pressed. I should clarify that a diff is a one shot. __________________ The Old Pfhaart

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Timer settings based on process speed	leitmotif	LIVE PLC Questions And Answers	23	February 7th, 2005 07:50 AM
Using Timers & Counters in WinCC	Rusty_K	LIVE PLC Questions And Answers	0	April 26th, 2004 12:06 PM
counters and Timers of Allen Bradley Program	ronpittc	LIVE PLC Questions And Answers	15	July 4th, 2003 03:12 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

February 23rd, 2005, 05:37 PM	#3
darrenj Member Join Date: Feb 2005 Location: Ottawa Posts: 1,003	Thanks...that is how i have done it but was wondering if there was a "master reset" that would reset all timers and counters.. Thanks Darren

February 23rd, 2005, 06:16 PM	#4
Ken Roach Lifetime Supporting Member + Moderator Join Date: Apr 2002 Location: Seattle, WA Posts: 17,104	There is no instruction or technique in the Logix system that will allow you to reset all the counters and timers in a routine or a program with a single instruction. You can use the RES instruction, or simply move a zero to the Accumulated value register of each counter or timer.

February 23rd, 2005, 06:29 PM	#5
darrenj Member Join Date: Feb 2005 Location: Ottawa Posts: 1,003	Thanks Ken..clears that up!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)