Hi, let's see if someone can help me here.
It's the first time I work with a GE FANUC PLC. The client gave me the backup files they took from the working PLC and a copy of LogicMaster90. This program didn't work because of 64bit on my PC, and the emulator was not good.
I swaped to Versapro and created a NewFolder importing everything from the original LM project. After doing some magic to being able to view the blocks from the code (I could only see the main block at first) I got to this Im showing in the pic. The Hardware Configuration is OK, but in the program blocks I see instructions without address. Why can this be, and most importantly how can it be restored?
Thanks
It's the first time I work with a GE FANUC PLC. The client gave me the backup files they took from the working PLC and a copy of LogicMaster90. This program didn't work because of 64bit on my PC, and the emulator was not good.
I swaped to Versapro and created a NewFolder importing everything from the original LM project. After doing some magic to being able to view the blocks from the code (I could only see the main block at first) I got to this Im showing in the pic. The Hardware Configuration is OK, but in the program blocks I see instructions without address. Why can this be, and most importantly how can it be restored?
Thanks