Change IP ML1400 via G306 redlion

amfalcon1

Member
Join Date
Oct 2014
Location
Fort Wayne
Posts
2
Hello masters, I have a trouble, I need change the IP for ML1400, I have a program with download the results with archive csv, but the program it is far in another network. xxx.xxx.xxx.xxx and the plc have a 169.254.0.11 and network protocol of G306 have 169.254.0.10 and Web server have 169.254.0.12.
For give the archive I need change mi pc with this netwaor 169.etc.

I can change the ip webserver and network protocol, but I need change the ip for ML1400 via virtual port or I don´t know other option, or it is possible create un port for include 1 ip address xxx.xxx.xxx.xxx and access to network 160.254.xx.xx.
 
Hello guys, I need add a scanner to microscan mobile Hawk model FIS-6170-0001G, when read the 2d code that information save on tag in redLion tags.
 

Similar Topics

Hi Guys, I have a pretty old version of RSLogix500 v8.2. This version only has Micrlogix1400 Series A controllers, but the problem is now we can...
Replies
10
Views
14,105
We had one go down. we have a new one. Their emergency Number don't work. The Model is TLSA046AAH-330N01-007 A catalog says we need software TET...
Replies
2
Views
136
“The HMI files we cannot open—they were saved in V13—we do not have that—I cannot restore file –please have them save in V11 and send them back to...
Replies
4
Views
135
Hi guys! I'm working in Studio 5000 and have a bunch of armorstarts there (+- 40). I need to set up parameters for each of them, mostly just same...
Replies
0
Views
75
Hello brothers We are contacting you because an error like [display change is currently controlled remotely] occurred while using the equipment we...
Replies
2
Views
175
Back
Top Bottom