Fault

ypf_108

Member
Join Date
Jul 2009
Location
china
Posts
160
This subroutine L0.0 when set?
(A9K5}XJI_4N`T2}Y`EA@ON.jpg


L00.jpg
 
L0.0 will be true when the rack fault occurs. OB86 will also get called when the rack fault clears but this time L0.0 will be false.
 
}@_UD1G{NQWS2R9EN3P@{2D.jpg

How to determine is the L0.0 do? thanks
I just started learning S7-300,My project S7-300 DP PROFIBUS 6se71.
 
That is just the S7-300 rack, not the inverter the 6SE71 of PROFIBUS failure? This fault me how to troubleshoot it?
 
OB86_EV_CLASS OB86_FLT_ID Meaning
B#16#39 B#16#C1 Expansion rack failure?OB86_MDL_ADDR: Logical base address of the IM?OB86_Z23: Contains one bit for each possible expansion rack: Each expansion rack that caused a call of OB86 is reported as having failed (the respective bits are set). Expansion racks that previously failed are no longer shown.- Bit 0: always 0- Bit 1: 1st expansion rack- :- Bit 21: 21st expansion rack- Bit 22 to 29: always 0- Bit 30: Failure of at least one expansion rack in the
SIMATIC S5 area- Bit 31: always 0
For example, this type do you mean?
 
L0.0 TRUE means that either a remote Station has been disabled using SFC 12 - OB86_EV_CLASS = 16#33 - or that a rack fault has occurred - OB86_EV_CLASS = 16#39 - and the error type and rack number are held in OB86_FLT_ID.
 

Similar Topics

Hi Guys, I have a 1769-L24-QBFCB1 that has the OK light flashing on the embedded counter module. The manual states it is a resettable fault, but...
Replies
0
Views
23
The application was working in Twincat 4022.16 Used VM for offline. recently changed the laptop and the getting the error with Message as below...
Replies
0
Views
32
I am working with Twincat 3. I am trying to store some images in files and when PLC restarts I want to read those files and get the images...
Replies
0
Views
38
Hello Everyone. Looking to see if any of you have encountered an issue with these drives. We have a major installation with around 30 of these...
Replies
0
Views
59
Hello, I encountered a problem with the kinetix 6500 drive, error code s22, loss of 3 phase voltage. After disassembling and replacing the thermal...
Replies
2
Views
130
Back
Top Bottom