Hello,
I've trouble trying to connect to a ControlLogix processor using a DH+ Link (I use PCMCK Card).
A DHRIO Card is in the local chassis and processor on slot 0.
I Connect my DH+ Cable to DHRIO CARD (station number is set to 10) ,browse the target processor in order to get the Path and as soon as I clic on Go Online I get ' No connection to that processor' message .
I did check the cabling and so on : all OK
As I can see the processor using RSLinx I think that the cabling is good.
Same problem if define the DH+ path as project path.
By another hand I can access the processor using Ethernet card (on same chassis).
It seems like the project can only be used online with Ethernet connection .
I've noted that the project name (the RSLogix PC file) is not same as project name in the Processor .
Is there someone that could help ?
Regards. Alan
I've trouble trying to connect to a ControlLogix processor using a DH+ Link (I use PCMCK Card).
A DHRIO Card is in the local chassis and processor on slot 0.
I Connect my DH+ Cable to DHRIO CARD (station number is set to 10) ,browse the target processor in order to get the Path and as soon as I clic on Go Online I get ' No connection to that processor' message .
I did check the cabling and so on : all OK
As I can see the processor using RSLinx I think that the cabling is good.
Same problem if define the DH+ path as project path.
By another hand I can access the processor using Ethernet card (on same chassis).
It seems like the project can only be used online with Ethernet connection .
I've noted that the project name (the RSLogix PC file) is not same as project name in the Processor .
Is there someone that could help ?
Regards. Alan