OkiePC
Lifetime Supporting Member
When I try to connect to any of my 160 series drives on devicenet, I get the error "DTL_E_FAIL I/O completed with errors".
This happens using both the 1747 passthrough driver and when connecting via a 1788-E2DN2 ethernet to devicenet linking module.
Is Drive Executive or RSLinx simply incompatible with 160 series drives or the 160 series dnet adapters?
I have the eds files for the 160 series drives and devicenet modules installed. I found one technote that addresses this error, but the workarounds haven't helped me.
Thanks,
Paul
This happens using both the 1747 passthrough driver and when connecting via a 1788-E2DN2 ethernet to devicenet linking module.
Is Drive Executive or RSLinx simply incompatible with 160 series drives or the 160 series dnet adapters?
I have the eds files for the 160 series drives and devicenet modules installed. I found one technote that addresses this error, but the workarounds haven't helped me.
Thanks,
Paul