joelolson Member J Join Date Dec 2017 Location Wyoming Posts 9 Apr 3, 2018 #1 Hi All, When I try to open up FTV Studio it goes directly to not responding.. I had a demo project open yesterday and now today its doing this. Any Ideas? Thanks
Hi All, When I try to open up FTV Studio it goes directly to not responding.. I had a demo project open yesterday and now today its doing this. Any Ideas? Thanks
jstolaruk Lifetime Supporting Member J Join Date Dec 2004 Location Detroit, SE Michigan Posts 3,910 Apr 3, 2018 #2 How far does it get? Was there anything new installed between then and now? Have you tried the repair selection from the control panel?
How far does it get? Was there anything new installed between then and now? Have you tried the repair selection from the control panel?
joelolson Member OP J Join Date Dec 2017 Location Wyoming Posts 9 Apr 3, 2018 #3 As soon as it is opened it goes to not responding. Also cannot open the transfer utility tool or anything else.
As soon as it is opened it goes to not responding. Also cannot open the transfer utility tool or anything else.
jstolaruk Lifetime Supporting Member J Join Date Dec 2004 Location Detroit, SE Michigan Posts 3,910 Apr 3, 2018 #4 I would try the repair feature from the control panel/programs and features.
VAN Member V Join Date Apr 2012 Location Wa Posts 509 Apr 3, 2018 #5 You could try deleting the project and reload the APA file. (You'll lose whatever was changed.)